Posts tagged "insulation"

Our last few posts have been about older projects as we try to get the blog up-to-date with everything that’s been going on around the house, but I figured it was time to also share what’s been keeping us (or mostly Chad) busy recently – and that would be installing insulation in our basement furnace room.

I’m not sure if we’ve ever shared a lot of pictures of our basement – or really even taken many, for that matter – but here are a few of the furnace room before we started working on it.  To be fair, the next two are actually from when we toured the house with a realtor before we bought it (so, not our stuff).  I was also clearly more focused on the storage component of the room than the furnace/walls when I took the photos, but you get the idea:

Some of the old shelves; the furnace is to the right.

Some of the old shelves; the furnace is to the right.

More shelves.  The furnace is to the left (it got cut out of the picture).

More shelves. The furnace is to the left (it got cut out of the picture).  That brick wall to the back is the one we’re working on now.

And here is the only picture I can find of the room since we moved in – and it’s also not a great one.  (Clearly, I was a bad blogger and forgot to take any fresh photos before we actually started working in the space … tsk tsk.)

The furnace room.  (The big green bag in the back is for our Christmas tree - not bodies.)

The furnace room. (The big green bag in the back is our Christmas tree – not bodies.)

So, basically, the room is in the center of the basement and holds both the furnace and a decent amount of storage.  The walls on either side are interior block walls that were previously covered in pegboard.  That back wall is the exterior block foundation wall.  It’s also where we’d like to locate a tankless water heater at some point in the (hopefully not too distant) future.  In preparation for the water heater being re-located to this room, we thought it would make sense to finish that back wall off – insulate it, build a stud wall, face the wall with something (probably fiber cement board), and generally seal it up and prepare a fresh, dry, solid surface for mounting the new water heater.

The first thing we did in this space was to completely clear out the room, removing all of our stuff as well as the old shelves and pegboard from the walls.  (Taking out all the shelves might seem like an unnecessary step, but it gives better access for installing the new water heater and will allow us to re-build shelves that provide more efficient storage for our stuff when we’re done.)  With the room cleaned out, Chad then scraped off all of the bubbling paint from the block wall and applied a couple of fresh coats of water proofing paint.  We’ve never had a moisture problem in this room (that we know about), but the bubbling / effervescence on the wall made us think some waterproofing paint might be a good layer of protection anyway.

The block foundation wall.

The old, bubbling paint on the back foundation wall.

We (and, by we, I mean Chad) then glued 2″ of extruded polystyrene (XPS) insulation to the wall using an adhesive formulated for foam.  We chose not to screw the sheets of insulation to the block wall (which would be the standard process) and relied on just the glue to hold them in place instead.  We did this primarily because we didn’t want to introduce any more holes into the old block wall in case that might make it more vulnerable to water, etc.

Gluing the XPS insulation to the block wall.  (Note our creative supports.)

Gluing the XPS insulation to the block wall. (Note our creative supports.)

Once glued, we sealed up the seams with foil tape and then added a layer of 1/2″ sheets of foil backed polyisocyanurate foam sheathing (also glued in place with an adhesive meant for foam).  We taped the seams between these sheets with foil tape also and sealed any gaps around the sides with “The Great Stuff” spray foam insulation.  (By the way, did you know they sell a “professional” version with a separate, reusable insulation gun?  A total game changer.)

Gluing the layer of polyiso insulation in place.

Gluing the layer of polyiso insulation in place.

We chose to follow up the standard pink extruded polystyrene insulation with a sheet of the foil backed polyiso foam sheathing just to be extra thorough.  This combination makes the wall waterproof (in case there were ever any issues with moisture seeping in through the foundation wall), insulates the space really well, and acts as a vapor barrier.  Chad did a bunch of research online before deciding on this approach – here’s a link to some more information on this method of insulating a basement wall in case anyone is interested in reading on.

And here’s what that wall looks like now, with all of the insulation in place:

Insulation is done - now we're ready for a wall!

Insulation is done – now we’re ready for a stud wall!

It’s funny because neither of us really would have said that the room felt cold before.  The foundation wall was cool to the touch, but we definitely never walked into the room and felt like it was drafty, cold, or otherwise in need of insulation.  Once the foam sheets went up on the wall, though, the room feels noticeably tighter.  The difference is pretty amazing.

So, our (really, Chad’s) next steps will be to put some additional insulation around the rim joists (we had foam insulation sprayed up there in the fall, but there’s still quite a gap, so we’re thinking we’ll just use some scraps from the polystyrene sheets to fill in that space) … and then it’s on to wall building.

Speaking of which – any guesses on how long it takes a frozen 2 x 4 to thaw and dry-out?  It’s definitely in the “days” category …

The 10'-er in front still feels kinda damp ... and it's been 5 days.

The 10′-er in front still feels kinda damp … and it’s been 5 days.

And I really have no comments on the rug collection in that last picture – they (along with partially full paint cans) seem to reproduce in the basement.  For every one I remove, it seems like 3 more show up … maybe we’ll get ahead of it one day.

What We’ve Been Up To

Wow – I was thinking it had been a while since I’d posted anything to the blog and it was probably time for an update, but I had no idea it’s been almost a year.  Crazy.  I guess time just got away from me.  Anywho, needless to say, I’m way past due in sharing what we’ve been up to, so here’s a quick look at some of the projects we’ve worked on over the last year.


1) Refinishing Hardwood Floors

This one makes the top of the list based solely on the impact it’s had to the main floor of our house.  We had the original hardwood floors refinished in the dining room and foyer (replacing some pretty worn carpet).  In hind sight, this turned out to be one of the more disruptive projects we’ve done since living in this house, but now that all of the inconvenience is behind us, I can safely say it was totally worth it!









2) Grown Up Curtains

We have curtains – real, grown up window treatments – in the dining room and living room!  This is something we’ve talked about since we started redecorating the main floor, but I was a non-believer.  Custom curtains aren’t cheap and I (apparently) am.  But, after 6 years of living with teal fabrics that no longer matched anything else on the main floor, we decided it was time to bite the bullet and update them.  We figure old ones lasted 20 years, which is a pretty good run for curtains … and the new ones have made a world of difference.  Needless to say, I’m now a believer in “the power” of curtains.

 The “before” pictures:





And, the “after” photos:






3) The Basement

We’ve started working in the basement … sealing it up, cleaning it out, and generally making it nice, bright, and less buggy.  So far, we’ve had new windows installed, sprayed foam insulation around the rim joists, and rearranged all of the stuff down there about 5 times to get better access to the couple of rooms we’re starting in.

photo 1

photo 2


4) New Porch Door!

We have a real door on the side porch now!  Since we moved in, it’s always been a screen door, which really wasn’t a great solution.  The door would get caught in the wind and blow open, it didn’t seal well at all, and generally felt like a “duct tape and chicken wire” solution.  So, we decided it was time to do something more permanent and went with a fiberglass 3/4 glass door that swings into the porch (to avoid the wind issue).  We’ve had it through the winter and have LOVED how much tighter the porch is now that we have a real door.

The old storm door:


And the new door:






5) No More Window Air Conditioners!

It might sound silly, but this was huge!  We had a couple of window air conditioners mounted in the wall – one was in our bedroom and one was in the sunroom.  They were probably a really great feature when those rooms were converted porches to living space long before the house had central air conditioning, but we’d never used them.  As far as we were concerned, they were loud (we could hear everything outside like it was happening in our bedroom), they were no where near air (or bug) tight, and they didn’t look very pretty.  Once they were gone (and the walls patched), we realized we’d lived with them entirely too long.  They are gone, but definitely not missed!

The master bedroom:

In the Master Bedroom


And the sunroom:

In the Sunroom / Family Room



6) New Liner for tbe Pool

This wasn’t exactly a planned upgrade, but we found our pool empty and the liner collapsed when we went to open it last spring, so a new liner it was.  We knew the liner was getting up there in age, so it as really just a matter of time.  Hopefully this means we’ll have some uninterrupted seasons of pool use ahead of us – these pictures make me so excited for warmer weather!  I can’t wait to go swimming with Haley this year – I think she will have so much fun with it!







Anyway, many apologies for the lengthy absence.  I think this brings the blog (roughly) up to date … more to come (hopefully without a year passing in the meantime)!